Commit 1b785cea authored by Alexander Dielen's avatar Alexander Dielen

fixed file paths

parent 5a00eeab
......@@ -7,7 +7,7 @@ class ReadWriteOBJ(unittest.TestCase):
self.mesh = openmesh.TriMesh()
def test_load_simple_obj(self):
ok = openmesh.read_mesh(self.mesh, "cube-minimal.obj")
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal.obj")
self.assertTrue(ok)
......@@ -22,7 +22,7 @@ class ReadWriteOBJ(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexNormal
file_name = "cube-minimal.obj"
file_name = "TestFiles/cube-minimal.obj"
ok = openmesh.read_mesh(self.mesh, file_name, options)
......@@ -87,7 +87,7 @@ class ReadWriteOBJ(unittest.TestCase):
def test_load_simple_obj_force_vertex_colors_although_not_available(self):
self.mesh.request_vertex_colors()
file_name = "cube-minimal.obj"
file_name = "TestFiles/cube-minimal.obj"
options = openmesh.Options()
options += openmesh.Options.VertexColor
......@@ -107,7 +107,7 @@ class ReadWriteOBJ(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.FaceTexCoord
file_name = "cube-minimal-texCoords.obj"
file_name = "TestFiles/cube-minimal-texCoords.obj"
ok = openmesh.read_mesh(self.mesh, file_name, options)
......@@ -139,7 +139,7 @@ class ReadWriteOBJ(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.FaceColor
file_name = "square_material.obj"
file_name = "TestFiles/square_material.obj"
ok = openmesh.read_mesh(self.mesh, file_name, options)
......@@ -161,7 +161,7 @@ class ReadWriteOBJ(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
file_name = "cube-minimal-vertex-colors-after-vertex-definition.obj"
file_name = "TestFiles/cube-minimal-vertex-colors-after-vertex-definition.obj"
ok = openmesh.read_mesh(self.mesh, file_name, options)
......@@ -195,7 +195,7 @@ class ReadWriteOBJ(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
file_name = "cube-minimal-vertex-colors-as-vc-lines.obj"
file_name = "TestFiles/cube-minimal-vertex-colors-as-vc-lines.obj"
ok = openmesh.read_mesh(self.mesh, file_name, options)
......
......@@ -7,7 +7,7 @@ class ReadWriteOFF(unittest.TestCase):
self.mesh = openmesh.TriMesh()
def test_load_simple_off_file(self):
ok = openmesh.read_mesh(self.mesh, "cube1.off")
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube1.off")
self.assertTrue(ok)
......@@ -43,8 +43,8 @@ class ReadWriteOFF(unittest.TestCase):
options += openmesh.Options.VertexColor
options += openmesh.Options.ColorFloat
openmesh.write_mesh(self.mesh, "temp.off", options)
openmesh.read_mesh(self.mesh, "temp.off", options)
openmesh.write_mesh(self.mesh, "TestFiles/temp.off", options)
openmesh.read_mesh(self.mesh, "TestFiles/temp.off", options)
# Check if vertices still have the same color
count = 0
......@@ -62,7 +62,7 @@ class ReadWriteOFF(unittest.TestCase):
options = openmesh.Options(openmesh.Options.VertexColor)
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
......@@ -71,9 +71,9 @@ class ReadWriteOFF(unittest.TestCase):
options += openmesh.Options.ColorFloat
# Write the mesh
ok = openmesh.write_mesh(self.mesh, "cube_floating.off", options)
ok = openmesh.write_mesh(self.mesh, "TestFiles/cube_floating.off", options)
self.assertTrue(ok)
ok = openmesh.read_mesh(self.mesh, "cube_floating.off", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube_floating.off", options)
self.assertTrue(ok)
self.assertEqual(self.mesh.n_vertices(), 8)
......@@ -108,7 +108,7 @@ class ReadWriteOFF(unittest.TestCase):
options = openmesh.Options(openmesh.Options.VertexColor)
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
......@@ -118,14 +118,14 @@ class ReadWriteOFF(unittest.TestCase):
options += openmesh.Options.ColorFloat
# Write the mesh
ok = openmesh.write_mesh(self.mesh, "cube_floating_binary.off", options)
ok = openmesh.write_mesh(self.mesh, "TestFiles/cube_floating_binary.off", options)
self.assertTrue(ok)
self.mesh.clear()
options.clear()
options += openmesh.Options.VertexColor
options += openmesh.Options.Binary
options += openmesh.Options.ColorFloat
ok = openmesh.read_mesh(self.mesh, "cube_floating_binary.off", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube_floating_binary.off", options)
self.assertTrue(ok)
self.assertEqual(self.mesh.n_vertices(), 8)
......
......@@ -10,7 +10,7 @@ class ReadWriteOM(unittest.TestCase):
def test_load_simple_om_force_vertex_colors_although_not_available(self):
self.mesh.request_vertex_colors()
file_name = "cube-minimal.om"
file_name = "TestFiles/cube-minimal.om"
options = openmesh.Options()
options += openmesh.Options.VertexColor
......@@ -34,7 +34,7 @@ class ReadWriteOM(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexTexCoord
ok = openmesh.read_mesh(self.mesh, "cube-minimal-texCoords.om", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal-texCoords.om", options)
self.assertTrue(ok)
......@@ -66,7 +66,7 @@ class ReadWriteOM(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "cube-minimal-vertexColors.om", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal-vertexColors.om", options)
self.assertTrue(ok)
......@@ -97,7 +97,7 @@ class ReadWriteOM(unittest.TestCase):
self.mesh.release_vertex_colors()
def test_write_triangle(self):
filename = "triangle-minimal.om";
filename = "TestFiles/triangle-minimal.om";
# Generate data
v1 = self.mesh.add_vertex(openmesh.Vec3d(1.0, 0.0, 0.0))
......@@ -135,7 +135,7 @@ class ReadWriteOM(unittest.TestCase):
options += openmesh.Options.VertexColor
options += openmesh.Options.ColorFloat
filename = "triangle-minimal-ColorsPerVertex.om"
filename = "TestFiles/triangle-minimal-ColorsPerVertex.om"
# Generate data
v1 = self.mesh.add_vertex(openmesh.Vec3d(1.0, 0.0, 0.0))
......
......@@ -7,7 +7,7 @@ class ReadWritePLY(unittest.TestCase):
self.mesh = openmesh.TriMesh()
def test_load_simple_point_ply_file_with_bad_encoding(self):
ok = openmesh.read_mesh(self.mesh, "pointCloudBadEncoding.ply")
ok = openmesh.read_mesh(self.mesh, "TestFiles/pointCloudBadEncoding.ply")
self.assertTrue(ok)
......@@ -16,7 +16,7 @@ class ReadWritePLY(unittest.TestCase):
self.assertEqual(self.mesh.n_faces(), 0)
def test_load_simple_point_ply_file_with_good_encoding(self):
ok = openmesh.read_mesh(self.mesh, "pointCloudGoodEncoding.ply")
ok = openmesh.read_mesh(self.mesh, "TestFiles/pointCloudGoodEncoding.ply")
self.assertTrue(ok)
......@@ -25,7 +25,7 @@ class ReadWritePLY(unittest.TestCase):
self.assertEqual(self.mesh.n_faces(), 0)
def test_load_simple_ply(self):
ok = openmesh.read_mesh(self.mesh, "cube-minimal.ply")
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal.ply")
self.assertTrue(ok)
......@@ -36,7 +36,7 @@ class ReadWritePLY(unittest.TestCase):
def test_load_simple_ply_force_vertex_colors_although_not_available(self):
self.mesh.request_vertex_colors()
file_name = "cube-minimal.ply"
file_name = "TestFiles/cube-minimal.ply"
options = openmesh.Options()
options += openmesh.Options.VertexColor
......@@ -57,12 +57,12 @@ class ReadWritePLY(unittest.TestCase):
def test_load_simple_ply_with_vertex_colors(self):
self.mesh.request_vertex_colors()
file_name = "cube-minimal.ply"
file_name = "TestFiles/cube-minimal.ply"
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "cube-minimal-vertexColors.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal-vertexColors.ply", options)
self.assertTrue(ok)
......@@ -98,7 +98,7 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
......@@ -134,18 +134,18 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
options += openmesh.Options.Binary
ok = openmesh.write_mesh(self.mesh, "meshlab_binary.ply", options)
ok = openmesh.write_mesh(self.mesh, "TestFiles/meshlab_binary.ply", options)
self.assertTrue(ok)
self.mesh.clear
ok = openmesh.read_mesh(self.mesh, "meshlab_binary.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab_binary.ply", options)
self.assertTrue(ok)
self.assertEqual(self.mesh.n_vertices(), 8)
......@@ -180,17 +180,17 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
options += openmesh.Options.ColorFloat
ok = openmesh.write_mesh(self.mesh, "meshlab_float.ply", options)
ok = openmesh.write_mesh(self.mesh, "TestFiles/meshlab_float.ply", options)
self.assertTrue(ok)
self.mesh.clear
ok = openmesh.read_mesh(self.mesh, "meshlab_float.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab_float.ply", options)
self.assertTrue(ok)
self.assertEqual(self.mesh.n_vertices(), 8)
......@@ -226,18 +226,18 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexColor
ok = openmesh.read_mesh(self.mesh, "meshlab.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab.ply", options)
self.assertTrue(ok)
options += openmesh.Options.ColorFloat
options += openmesh.Options.Binary
ok = openmesh.write_mesh(self.mesh, "meshlab_binary_float.ply", options)
ok = openmesh.write_mesh(self.mesh, "TestFiles/meshlab_binary_float.ply", options)
self.assertTrue(ok)
self.mesh.clear
ok = openmesh.read_mesh(self.mesh, "meshlab_binary_float.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/meshlab_binary_float.ply", options)
self.assertTrue(ok)
self.assertEqual(self.mesh.n_vertices(), 8)
......@@ -274,7 +274,7 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexTexCoord
ok = openmesh.read_mesh(self.mesh, "cube-minimal-texCoords.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal-texCoords.ply", options)
self.assertTrue(ok)
......@@ -306,7 +306,7 @@ class ReadWritePLY(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.VertexNormal
ok = openmesh.read_mesh(self.mesh, "cube-minimal-normals.ply", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube-minimal-normals.ply", options)
self.assertTrue(ok)
......
......@@ -7,7 +7,7 @@ class ReadWriteSTL(unittest.TestCase):
self.mesh = openmesh.TriMesh()
def test_load_simple_stl_file(self):
ok = openmesh.read_mesh(self.mesh, "cube1.stl")
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube1.stl")
self.assertTrue(ok)
......@@ -21,7 +21,7 @@ class ReadWriteSTL(unittest.TestCase):
options = openmesh.Options()
options += openmesh.Options.FaceNormal
ok = openmesh.read_mesh(self.mesh, "cube1.stl", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube1.stl", options)
self.assertTrue(ok)
......@@ -36,7 +36,7 @@ class ReadWriteSTL(unittest.TestCase):
self.mesh.release_face_normals()
def test_load_simple_stl_binary_file(self):
ok = openmesh.read_mesh(self.mesh, "cube1Binary.stl")
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube1Binary.stl")
self.assertTrue(ok)
......@@ -51,7 +51,7 @@ class ReadWriteSTL(unittest.TestCase):
options += openmesh.Options.FaceNormal
options += openmesh.Options.Binary
ok = openmesh.read_mesh(self.mesh, "cube1Binary.stl", options)
ok = openmesh.read_mesh(self.mesh, "TestFiles/cube1Binary.stl", options)
self.assertTrue(ok)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment